|
2 required for a complete system. Edson Stainless Steel Dingy Davits offer
a quick and simple stern deck or taffrail installation. Edson Dinghy Davits are
strong, attractive and designed to give added height to your dingy, helping to avoid
swamping when rolling or healing. Edson Dinghy Davits are built of highly polished, marine grade 316 Stainless
Steel and come standard with Garhauer blocks and Spinlock cam-cleats
Installation: Edson Stainless
Steel Dingy Davits must be properly installed with backing plates to provide adequate
base strength. Edson Dinghy Davits are designed to be placed on deck, in-line or
aft of the existing stern rails. In this position, the davit head is approximately
15" above the top rail. Positioning to a wider base setting is preferable. The optional
7-3/4"x6-1/2" Edson Davit Mounting shoe allows for ease of mounting and removal.
The optional Connecting Bar provides additional support and rigidity.
Stainless Davit Ordering Information
Edson Stainless Davit (2 required) - Order
#500ST-4030
Optional Stainless Mounting Shoe (2 required) - Order #508ST-78
Optional 5’ Stainless Connecting Bar - Order #513ST-1125-60
(custom length Connecting Bars available)
Features:
- Built of highly polished, marine grade 316 Stainless
Steel.
- For Power or Sail
- Includes 33’ lifting line with Garhauer blocks and
Spinlock cam-cleats.
- Optional Stainless Mounting Shoes allow for
ease of mounting and removal.
- 5:1 Lifting Tackle included.
- Optional Connecting Bar available for added
support and rigidity.
- Positive-locking Spinlock cam-cleats holds
lifting tackle securely.
- Long 40.5" (103cm) reach and 31" (79cm) rise
make lifting and storage of most all dinghies possible.
- Practical lifting capacity of a davit rigged
with a 5:1 purchase is 250 lb (113 kg) capacity.
|
|
- Practical lifting capacity of Edson Dinghy
Davits rigged with a 5:1purchase is 250 lbs (113 kg).
- Edson Dinghy Davits must be properly installed with backing
plates to provide adequate strength.
- The total weight of the dinghy and motor should
not exceed the safe working load of one davit or 250 lbs (113 kg).
- CAUTION Water should not be allowed to collect
in the dinghy or inflatable while being held in Davits. Dinghy should be covered
or equipped with a drain to allow water to escape. Failure to do so could
damage the davits and dinghy. A dinghy on davits should not extend beyond
the sides of the boat to prevent catching water when rolling or healing.
|
|
Boat Outfitting
