|
All Lopolights come pre-wired ready for connection to your power supply (10 - 32 VDC). Technical details about 200-020 Masthead round w/anchor - 2 nm - powerboats light
- LED (Light Emitting Diode) navigation light.
- Unique and precise definition of light angles.
- World wide type approval to comply with COLREG 72/EN 14744/UL 1104
- Rugged and unbreakable: Precision machined anodized aluminum or
carbon fiber housing protects the LED’s and electronics.
- Completely waterproof and vibration proof: Interior is fully filled
and sealed with special potting resin.
- Waterproof to IP 68+ (submersible).
- Lifetime over 50,000 hours or 4,200 nights.
- Low power consumption – 70 to 90% less than traditional navigation
lights
- Full brightness with input voltages ranging from 10 to 32 Volts.
- All Lopolights have been tested during production, concluding with
a 24 hour burn-in test.
- Easy to install, adaptor and screws included (when applicable).
|
| Approvals |
MCA (UK), QQ-TAN-03/05-01R
USCG (USA), approved 09-2006 under 111.075 by recognized laboratory QinetiQ
DMA (DK), 199942520
RINA (Italy), ELE054806CS
BSH (Ger) pending |
| Included in package |
1 Navigation light
2 Terminal screws and washers (3 * 8 mm)
Installation guide |
| Measurements |
Light: Ø: 92.5 mm (3.64 in) – H: 28.0 mm (1.1 in) – W: 310 gram (11
oz)
Mounting block: Ø: 92.5 mm (3.64 in) – H: 24mm (1.0 in) – W: 148 gram (5
oz) |
| Materials |
anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy,
Polyurethane. |
| Supply voltage |
10-32 VDC |
| Power consumption |
4.2 Watt
Current @ 12 VDC: 0.35 A: Current @ 24 VDC: 0.18 A |
| Light colors |
White - 225° or 360° |
| Intensity |
> 5,4cd |
| Visibility (@K=0.8) |
2 nm |
| Number of LED's |
76 |
| Suggested feed cables |
12 VDC: 2 x 0.50 mm2 (maximum outer diameter 7mm)
24 VDC: 2 x 0.50 mm2 (maximum outer diameter 7mm) |
| Expected life |
50.000 |
| Ship size |
12 meters (39.4 feet) |
| Mounting |
Horizontal |
|
Boating
