Richter Anchors

The Richter Anchor - Patented Self Releasing Design Recommended in most conditions and for high performance

The Richter Anchor design has an aggressive fluke pattern, and centered weight with the addition of a release bar that makes the anchor near 100% retrievable.

The Richter Anchor combines three proven technologies to create a truly unique high performance anchor. By offering the weight of a River Anchor, the penetration of a Grapnel Anchor and the easy retrieval of a Slip Ring Anchor, the revolutionary Richter digs in and holds under almost any conditions.  The Richter Anchor has been shown to maintain a good hold with a 3:1 scope, often even less anchor line. Its patented release system allows for easy retrieval even when buried or tangled.

Used by countless Tournament fishermen, the Richter design is suitable for use in all weather and bottom conditions. Its performance in rocks, mud, weeds, and sand is superior to traditional anchors and requires less anchor line. The Richter Anchor will set and hold, even using a 3-1 scope, allowing boaters and fishermen to stay closer to their set-points. Standard designs do not have the holding power of the Richter Anchor.

• Unique fixed grapnel and river combination with release mechanism
• PVC-coated, galvanized iron/steel
• Holds in most bottom types with minimum scope
• Tournament Tested
• Warranty: One year

Richter Anchors recommends:

• 14 lb. Anchor for boats up to 15 ft.
• 18 lb. Anchor for boats up to 20 ft.
• 25 lb. Anchor for boats up to 30 ft.
• Using 3/8 nylon braided anchor line with a thimble. Connect the anchor ring and thimble with a 5/16" connect link and nut.
• Consider using 2'-4' ft of chain on rough water.

The Richter Anchor is simple to use.
	Lowering... Just lower a Richter Anchor off the stern or bow.
	Holding... Set your line in at a 30°-40° angle or a 3 to 1 scope. Use extra line in rough water or current.
	Retrieving... Position the boat over the Anchor or just past vertical, to allow the line to follow the release bar to base.