Application Details - Epifanes Clear Gloss Varnish
||Interior and exterior wood above the waterline. For long lasting protection
of all marine or household woods. Maintenance of existing, intact, one
and two-component varnish systems.
Superior flow, gloss and durability. Excellent flexibility and water resistance
in all climatic conditions. High build capability. Renowned for its high gloss
retention and weather durability. This varnish lasts! Even in tropical climates!
||55 +/- 2 vol. %
||Per coat wet - 50 micron
||Per coat dry - 30 micron
||Brush, roller, conventional air spray, H.V.L.P., airless.
At 65F / 65% RH
|Tack free - 3 hours / Tape free - 24 hours
Dry - 12 hours / Recoatable - 24 hours
Conventional air: Thin as needed up to 20% with Epifanes Spray Thinner for
Paint & Varnish. Spray viscosity 18 - 22 seconds Din Cup 4, 14 - 18 seconds
Ford Cup 4. Nozzle 1.5 mm. - 1.8 mm. Pressure 2 – 3 Bar.
||Epifanes Accelerator, Epifanes Retarder
||Temperature should be between 50F. and 85F. during application. Air humidity
below 85%. Avoid varnishing in too much wind or sun. A rapid loss of solvents
will occur under these conditions and will decrease the flowing ability. Add
thinner up to the specified percentage to compensate for the faster release
of solvents. Epifanes Clear Gloss Varnish is compatible with most other types
of one-component alkyd or urethane based varnishes and over two-component varnishes.
Any existing finish must be intact, degreased and sanded prior to recoating.
||250 ml., 500 ml., 1000 ml., 5000 ml.