|
This 2-Channel Dimmer Module provides dimming for “PWM Enabled” 2-wire Imtra PowerLED Downlights and supports a broad range of lighting configurations and control methods.
The ILIM80130 can control a large number of PowerLED Downlights on each channel, only limited by the total current being drawn. It supports PWM current switching of up to 7A per channel (168W/12VDC and 336W/24VDC combined). It also supports Imtra 3-wire Bi-color Downlights.
Control interfaces are provided to support:
- Single and dual momentary pushbuttons
- 0-10v analog control (external voltage or potentiometer)
- 4-20ma analog control
The two channels may be operated as totally independent lighting zones or “Paired” together so that both channels are controlled in unison.
Features
- Provides smooth dimming control to Imtra 2-wire PowerLEDs
- Supports bi-color dimming with a single momentary switch
- Operates two zones independently or in unison (paired mode)
- Supports 4-20mA analog input (from external control system)
- Supports 0-10V potentioneter control (100k ohm)
- Supports 0-10V analog input (from external control system)
- Mounts with supplied brackets (or with 35mm DIN rail)
Specifications
| |
| Housing Finish/Material |
|
White/PC |
| Certifications & Compliance |
|
CE, ROHS |
| Dimmer Control Interface |
|
NO momentary, 0-10V analog external, 0-10V potentiometer, 4-20mA external |
| Input Voltage |
|
10-40VDC |
| Dimensions |
|
4.13" l x 3.39" w x 2.32"h |
| Warranty |
|
2 Years |
| Ingress Protection |
|
IP40 (applies only to frontal water exposure, i.e. exposed surface) |
| Load Rating |
|
7A/channel (14A combined) |
| Max Operating Temperature |
|
49°C (120°F) |
| Approximate Ship Weight (lbs) |
|
1 |
|
Boat Outfitting
